Store
BOBBY JONES Wedge by Jesse Ortiz and Dave Pelz
Bobby Jones Wedge by Jesse Ortiz and Dave Pelz The Bobby Jones Wedge by Jesse Ortiz and Dave Pelz is cast from a soft 302 stainless steel. A pocket and deep set channels are milled to accommodate the club s wear-resistant Carpenter 440XH face material. The channels behind the clubface-insert remove substantial weight from the central section of the body, allowing additional weight to be repositioned to the sole for a low CG (center of gravity). The aerospace steel alloy Carpenter 440XH face material—a remarkably wear-resistant metal alloy (often used in industrial bearing assemblies and critical valve components)—will maintain both face friction and groove integrity far longer than conventional wedges, thus providing consistently high backspin longevity. With new USGA regulations on the horizon, wedge durability will be more important than ever for maintaining shot trajectory and control. The Carpenter 440XH material is milled to a USGA-conforming texture of 180 micro-inches, creating a face texture and edge-groove radius perfect for consistent shot making. Many golfers do not realize that backspin longevity is so fleeting that tour professionals replace their wedges often throughout the golf season to keep ball control and shot performance at the highest possible level. These enduring wedges will help golfers hit better scoring game shots, control their wedge distances to tighter tolerances, and consistently shoot lower scores. Using a proprietary design technique, Bobby Jones Pelz Wedges provide the perfect combination of soft-feeling shots and extremely low face wear to produce a superior-performing wedge, season after season. By applying heat and pressure to a special structural bonding membrane, Ortiz facilitates the release of an epoxy resin, which, upon cooling, creates a bond between the club s stainless body and face material that is stronger than welding. Upon curing, the membrane returns to its slightly spongy state, thus creating a soft forged-like feel to each shot.
Related Products
CALLAWAY RAZR X Tour Individual Iron with Steel Shafts
Callaway RAZR X Tour 3-PW Individual Iron with Steel Shafts The Callaway RAZR X Tour Iron creates tighter shots, shorter putts and lower scores through uncompromised performance. Most irons today are designed to maximize one specific performance benefit while sacrificing all other critical areas needed to hit more greens. To consistently hit it close and shoot lower scores, golfers need to be able to make shots from all areas of the golf course. That s why RAZR Technology is such a breakthrough. This technology will lead the industry into the next generation of iron design by delivering the distance and forgiveness of a wide sole iron while retaining the playability and turf interaction advantages of a thin sole iron. Additional Features: Iron Construction: Cast Material: Steel Shaft: True Temper Dynamic Gold
TITLEIST PreOwned Vokey Spin Milled Wedge
Titleist Vokey Spin Milled Wedge This club conforms to the 2010 USGA Rules for Touring Professionals A classic teardrop shaped wedge with a rougher surface for better spin. Vokey Spin Milled wedges are new from Titleist, and designed to provide a truly discernible performance option - increased spin. By working with Tour players to create wedges that performed under the most challenging major championship conditions, Titleist master craftsman Bob Vokey has developed a precisely machined, tight-tolerance groove that provides the player with increased spin on both full and partial wedge shots. Vokey Spin Milled wedges feature a CNC-machined cut face and grooves. A special circular saw-style cutting tool is used to create precise grooves with a steeper draft angle and a tighter edge radius for increased friction. They also have 30% more groove volume than a conventional wedge. This provides more consistent and higher spin, particularly from grassy lies and wet conditions. Spin Milled gives you the confidence to successfully execute more challenging short game shots.
TAYLORMADE R11 Individual Iron with Graphite Shaft
TaylorMade R11 Individual Iron with Graphite Shaft Inspired by R11 driver innovation, the new TaylorMade R11 Iron is tuned to perfection. Precision center-of-gravity (CG) placements, ultra-thin faces, a Tour sole design, and Inverted Cone Technology make R11 the most powerful, playable, and refined iron ever. With a weight port permanently positioned in the center of the back of an iron head during assembly, the Precision Weighting Port assures that each R11 iron in the set is of uniform swingweight while also ensuring that the CG location is precisely and optimally positioned in the center of the face between the toe and heel. In the past, clubmakers have installed cartridges of varying weight in the hosel to adjust swingweight, and by doing so have pulled the CG closer to the heel to varying degrees, resulting in a set of irons consistent in swingweight but inconsistent in CG location. The Inverted Cone Technology inside the R11 Irons promotes faster ball speed and distance on off-center hits, and the ultra-thin face thickness also promotes faster ball speed and distance in the R11 long- and middle-irons. The R11 irons Multi-Functional Sole is beveled at the back to make it perform like a much thinner sole, which increases playability from a variety of lies. Yet it also features a low and deeper center of gravity that makes it easy to launch the ball on a powerful and penetrating flight. Additional features: Ultra-thin face thickness promotes faster ball speed and distance Inverted Cone Technology promotes faster ball speed and distance on off-center hits Multi-functional sole increases playability from a variety of lies Progressive topline thickness promotes confidence at address throughout the set Progressive offset Advanced groove design promotes increased spin and control Iron construction: Cast Shaft types: Motore F1 65, Motore F1 55, Motore F1 75
